Extractor Kit for Springfield SA-35 and Browning Hi-Power

If you’re running a Springfield SA-35 or a classic Browning Hi-Power, you know that reliable extraction can sometimes be the weak link in an otherwise great pistol. This heavy-duty extractor kit is built to solve exactly that—sticky extraction, erratic ejection, or the occasional failure to extract. Designed by a crew with nearly four decades of experience working on semi-autos, this component addresses the specific geometry of the 9mm case and the Hi-Power slide’s extractor angle. The result? Consistent, positive extraction and a uniform ejection pattern, even with less-than-perfect ammo. It also includes an override feature on the hook’s chamber-facing surface, so if a faulty round gets stuck, the extractor can ride over the case rim instead of locking everything up.

Compatibility

• Springfield Armory SA-35 (all variants)
• Browning Hi-Power (standard 9mm models)
• Fits both original FN and aftermarket slides with standard extractor cut
• Does not fit compact or scaled-down Hi-Power clones without verifying slide dimensions

Key Features

• Wire EDM cut from heat-treated tool steel – high tensile strength, black oxide finished for corrosion resistance
• Claw geometry optimized for 9mm – designed around the case rim and extractor location in the Hi-Power slide
• Override capability – allows the hook to slip over a stuck case rim during a failure-to-extract event
• Includes extra-power extractor spring – provides stronger, more consistent tension than OEM
• Replacement extractor pin included – no need to hunt down small parts
• Smooth feeding from magazine – better control of the round as it enters the chamber

Install Difficulty: 3 out of 5

This is not a drop-in part. You’ll need a roll pin punch, a small hammer, and a bench block or padded vise. Some fitting may be required depending on your slide and barrel lock-up. We recommend watching our install video (linked on the product page) before starting. If you’re not comfortable with detail work, a local gunsmith can handle it in about 15 minutes.

Frequently Asked Questions

Will this fit my Springfield SA-35 right out of the box?

It’s designed to be a direct replacement for the factory extractor in the SA-35. In most cases, you can swap it in with the included spring and pin, but occasionally the hook may need a light file pass to match your chamber face. Check clearance by hand before reassembly.

Does this fix erratic ejection patterns?

Yes. The improved claw geometry and stronger spring work together to control the case through the entire ejection cycle. Many shooters report a more consistent 2-3 o’clock pattern after installing this kit.

Do I need to replace the extractor spring regularly?

The included extra-power spring is robust and should last thousands of rounds. We recommend checking it every 2,000–3,000 rounds for signs of wear or loss of tension. The kit comes with one spring, but you can order replacements separately.

Shipping & Warranty: Ships within one business day from our shop. This kit is covered by Competition Trigger Works’ one-year warranty against manufacturing defects. If it fails due to material or workmanship, we’ll replace it—no hassle. Questions on fitment? Give us a call or drop an email; we’re real people who answer.