If you’ve got a CZ P-10 optics-ready pistol and want to mount an Aimpoint ACRO, Steiner MPS, or Lead & Steel Pandora PB-3, you’ve probably noticed the factory slide pattern doesn’t line up with those optics. That’s where this steel mounting plate comes in. It bridges the gap between your P-10’s slide cut and the footprint of these enclosed emitter-style sights, giving you a rock-solid mounting surface without any adapter plates that shift or loosen. It solves the “will this optic fit my gun” question cleanly, so you can get back to shooting.
Compatibility
- Aimpoint ACRO P-1 & P-2
- Steiner MPS
- Lead & Steel Pandora PB-3
- Fits all CZ P-10 models with the factory Optics-Ready slide cut (P-10 C, P-10 F, P-10 S)
Key Features
- Machined from billet steel – Made right here in Arizona, this mount is built to hold zero under recoil and hard use.
- Direct mount to your factory slide – No need to send your slide out or modify anything. Just clean the mounting surface, place the plate, and torque to spec.
- Mounting screws included – Everything you need is in the package. We recommend the screws be torqued to 15 in-lb.
- Low-profile design – Keeps the optic as close to the bore axis as possible for a natural sight picture.
Install Difficulty: 2 out of 5
This is a straightforward install. You’ll need a torque wrench or driver that reads inch-pounds, a small hex bit (included), and a clean rag. Clean the slide’s optic pocket with rubbing alcohol, apply a tiny dab of blue Loctite to the screws (not included, but recommended), set the mount, and torque to 15 in-lb. We have an install video on our site that walks you through it in under three minutes.
Frequently Asked Questions
Will this mount fit my CZ P-10 if it’s not an optics-ready model?
No. This mount is specifically designed for CZ P-10 slides that come from the factory with the optics-ready cut. If your slide isn’t cut, you’ll need to have it milled or use a different mounting solution.
Can I use this mount with other closed-emitter optics like the Holosun 509T?
No. This mount is machined specifically for the ACRO / MPS / PB-3 footprint. The 509T uses a different lug pattern and won’t line up.
Do I need to use a sealing plate or gasket with this mount?
No sealing plate is required. The billet steel mount sits flat against the slide. We do recommend a small dab of blue Loctite on the screws to keep them from backing out under recoil.
Orders ship within one business day from our shop in Arizona. Every mount is backed by our limited lifetime warranty against defects in material or workmanship. If something’s not right, we’ll make it right.
Reviews
There are no reviews yet.