Polymer Flat-Faced Forward Set Trigger Kit for Polymer Frame M&P M2.0

If you’ve been shooting a stock M&P M2.0 and wished the trigger felt a little more predictable—less mush, less travel, and a cleaner break—this polymer flat-faced forward set trigger kit is exactly what you’re looking for. It’s designed to reduce trigger pull weight by about 2 pounds and cut overall trigger travel by roughly 40%, giving you a shorter, more consistent pull with a crisp break and a fast reset. The forward set geometry means the trigger sits closer to the reset point from the start, so you spend less time pulling and more time staying on target. Whether you’re setting up for competition or just want a smoother everyday carry trigger, this kit gives you that performance without needing a gunsmith.

Compatibility

• Smith & Wesson M&P M2.0 (full size, compact, and Shield Plus models with polymer frame)
• Does NOT fit original M&P 1.0 or M&P Shield (non-Plus)
• Does NOT fit M&P 2.0 metal-frame models
• Works with factory or aftermarket sear housing blocks

Key Features

• Drop-in installation – no fitting, filing, or polishing required. Just swap out the factory parts and you’re set.
• Adjustable pull weight – use the included springs with factory springs to dial in a pull anywhere from duty/carry weight down to competition-light.
• Reduced pre-travel, over-travel, and reset – every stage of the pull is shorter and more defined.
• Center-mounted pivoting safety – keeps the factory safety function intact, so you’re not losing any reliability.
• Smooth uptake and reset – no grit or stacking, just a clean, consistent feel shot after shot.
• Budget-friendly – same core upgrades as the full forward set trigger kit, but without the added cost of metal parts.

Install Difficulty: 2 out of 5

This is a straightforward drop-in job. You’ll need a punch set, a small hammer or mallet, and about 20–30 minutes. If you’ve ever detail-stripped an M&P frame, you can handle this. We also have a full install video on our site to walk you through it step by step.

Frequently Asked Questions

Will this fit my M&P 2.0 Compact with a 4-inch barrel?

Yes, as long as it’s a polymer-frame M2.0 Compact, this kit is a direct fit. The trigger shape and geometry work with all polymer M2.0 frames, regardless of barrel length.

Do I need to replace the sear or striker block?

No. This kit is designed to work with your factory sear and striker block. It includes the trigger, trigger bar, and springs—everything you need for the upgrade. If you want to reduce pull weight further, you can swap springs, but it’s not required.

Can I use this for concealed carry?

Absolutely. The forward set design shortens the reach and gives you a consistent break, which can actually improve accuracy under stress. The pull weight is adjustable, so you can keep it at a safe carry weight while still enjoying the shorter travel and reset.

Shipping & Warranty: All orders ship within one business day from our shop in Missouri. Every trigger kit comes with our lifetime warranty against defects—if something breaks or wears out, we’ll take care of you. No forms, no hassle.